Idea
In short
How do you build a breathing monitor band?
A stretch sensor or IMU on a sleep suit counts breaths and alerts if they stop, as an extra help. You need Seeed XIAO ESP32C3, BMI160 6-axis IMU, Li-Po battery 3.7 V 500 mAh and Active buzzer 5 V.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Detect slow cyclic motion.
Parts list
- Development Boards
- Sensors
- Batteries
- Motors & Actuators
How to build it
- Mount lightly on the chest
- Find the breathing frequency
- Alert on pauses
- Send a signal to a base
- This is an extra aid, never a replacement for care
Common questions
What parts do I need for the breathing monitor band?
Seeed XIAO ESP32C3, BMI160 6-axis IMU, Li-Po battery 3.7 V 500 mAh and Active buzzer 5 V.
How long does the breathing monitor band take to build?
About 360 minutes for a advanced maker.
