Idea
In short
How do you build a child fever monitor patch?
A small sensor under the arm sends temperature to a parent's phone overnight and alerts on fever. You need Seeed XIAO ESP32C3, TMP117 precision temperature sensor and Li-Po battery 3.7 V 500 mAh.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure body temperature accurately and send it over BLE.
Parts list
- Development Boards
- Sensors
- Batteries
How to build it
- Use a precise sensor touching the skin
- Wait for the reading to settle
- Send it every minute over BLE
- Alert above 38 °C
- Remember this is a helper, not a medical device
Common questions
What parts do I need for the child fever monitor patch?
Seeed XIAO ESP32C3, TMP117 precision temperature sensor and Li-Po battery 3.7 V 500 mAh.
How long does the child fever monitor patch take to build?
About 180 minutes for a intermediate maker.
