Idea
In short
How do you build a hand tremor measurement?
An IMU on the wrist measures tremor frequency and size, to learn how movement disorders are tracked. You need Seeed XIAO ESP32S3, BMI160 6-axis IMU and Li-Po battery 3.7 V 500 mAh.
- Level
- Advanced
- Time
- About 240 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use FFT to measure a movement frequency.
Parts list
- Development Boards
- Sensors
- Batteries
How to build it
- Sample at 100 Hz
- Remove gravity
- Run an FFT
- Find the main frequency and its strength
- Show results on a phone, for learning only
Common questions
What parts do I need for the hand tremor measurement?
Seeed XIAO ESP32S3, BMI160 6-axis IMU and Li-Po battery 3.7 V 500 mAh.
How long does the hand tremor measurement take to build?
About 240 minutes for a advanced maker.
