Seeed XIAO ESP32C3
Thumbnail-sized ESP32-C3 with battery charging.
MicrocontrollerESP32-C3 RISC-V 160 MHz
Flash4 MB
Logic level3.3 V
I/O pins11 GPIO
Development BoardsReviewedMPN 113991054Used in 18 projects
In short
What is the Seeed XIAO ESP32C3 and what is it used for?
Thumbnail-sized ESP32-C3 with battery charging. Makers use it for wearables and tiny sensors.
How it works
An ESP32-C3 RISC-V chip with Wi-Fi, Bluetooth 5 LE and a Li-ion charger on a 21 × 17.5 mm board.
Key specifications
| Development board spec | Value |
|---|---|
| Microcontroller | ESP32-C3 RISC-V 160 MHz |
| Flash | 4 MB |
| Logic level | 3.3 V |
| I/O pins | 11 GPIO |
| Wireless | Wi-Fi 2.4 GHz, Bluetooth 5 LE |
Pinout
5VUSB 5 V
3V33.3 V out
D4 D5I2C SDA SCL
D8 D9 D10SPI SCK MISO MOSI
D6 D7UART TX RX
BAT padsLi-ion cell, charged over USB
How to use it
Pick XIAO_ESP32C3 in the ESP32 core and always fit the supplied U.FL antenna before using Wi-Fi. The battery pads on the back make it easy to run from a small LiPo.
Applications
Wearables and tiny sensors
Builds that use it
Guided build
Posture reminder clip
Guided build
Step counter wristband
Guided build
Ladder tilt alarm
Guided build
Hot car cabin logger
Guided build
UV sunscreen reminder ring
Guided build
Smart water bottle
Guided build
E-paper conference name badge
Guided build
Sleep mask with wake light
Showing 8 of 18
Alternatives
- ESP32-C3 SuperMiniCheaper, no charger
- Seeed XIAO ESP32S3Dual core with PSRAM
Common questions
What is the Seeed XIAO ESP32C3 used for?
In maker projects: wearables and tiny sensors.
How does the Seeed XIAO ESP32C3 work?
An ESP32-C3 RISC-V chip with Wi-Fi, Bluetooth 5 LE and a Li-ion charger on a 21 × 17.5 mm board.
What can I use instead of the Seeed XIAO ESP32C3?
ESP32-C3 SuperMini and Seeed XIAO ESP32S3.
