Projects / Ideas / Thermal heat spot finder

Thermal heat spot finder

AdvancedTest & MeasurementIdeaReviewed
In short

How do you build a thermal heat spot finder?

A low-resolution thermal sensor finds the hottest spot on a circuit board or a room and shows it as a coloured grid. You need ESP32 DevKit V1, MLX90640 thermal camera, ILI9341 TFT Module and Breadboard 830 Tie Points.

Level
Advanced
Time
About 300 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Visualise temperature as an image.

Parts list

How to build it

  1. Read the thermal array over I2C
  2. Interpolate to a larger image
  3. Colour map the values
  4. Mark the hottest pixel
  5. Save a snapshot

Related projects

Common questions

What parts do I need for the thermal heat spot finder?

ESP32 DevKit V1, MLX90640 thermal camera, ILI9341 TFT Module and Breadboard 830 Tie Points.

How long does the thermal heat spot finder take to build?

About 300 minutes for a advanced maker.