Idea
In short
How do you build a wi-Fi signal strength map?
An ESP32 reads the strength of your router's signal as you walk around the house, and a button marks each spot with a number, so you can draw a map of strong and weak areas. A fun way to see walls and doors in radio, and to find the best place for a router. You need ESP32 DevKit V1, SSD1306 OLED Display, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 80 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Map the Wi-Fi signal around a home.
Parts list
- Development Boards
- Displays
- Switches
- Prototyping
- Prototyping
How to build it
- Connect to the router and read the signal strength
- Show it large on the screen
- Mark a spot with a button
- Print spot number and strength
- Draw the map on paper
Common questions
What parts do I need for the wi-Fi signal strength map?
ESP32 DevKit V1, SSD1306 OLED Display, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the wi-Fi signal strength map take to build?
About 80 minutes for a intermediate maker.
