Idea
In short
How do you build a plug-in AC power meter?
A PZEM-004T in a sealed box measures voltage, current, power and energy of any appliance. You need ESP32 DevKit V1, PZEM-004T energy meter module, SSD1306 OLED Display and ABS project box (100 × 60 × 25 mm).
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a ready-made energy meter safely over serial.
Parts list
- Development Boards
- Sensors
- Displays
- Mechanical & Hardware
How to build it
- Have a qualified electrician wire the mains side in a closed box
- Read the module over its isolated serial link
- Show watts, kWh and power factor
- Log to Wi-Fi
- Never open it while plugged in
Common questions
What parts do I need for the plug-in AC power meter?
ESP32 DevKit V1, PZEM-004T energy meter module, SSD1306 OLED Display and ABS project box (100 × 60 × 25 mm).
How long does the plug-in AC power meter take to build?
About 120 minutes for a intermediate maker.
