Projects / Ideas / Bicycle rear vehicle warning

Bicycle rear vehicle warning

IntermediateVehiclesIdeaReviewed
In short

How do you build a bicycle rear vehicle warning?

A small lidar on the seat post senses a vehicle approaching from behind and buzzes the handlebar so the rider knows without turning. You need ESP32 DevKit V1, Laser distance sensor (TF-Luna LiDAR), Vibration motor (coin type), BC547 NPN transistor, Resistor 1 kΩ, 18650 cell 2600 mAh (branded), Battery holder 18650 single and TP4056 module with protection (USB-C).

Level
Intermediate
Time
About 180 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure closing speed from changing distance.

How to build it

  1. Read distance over UART
  2. Work out closing speed from consecutive readings
  3. Warn only when something approaches faster than walking pace
  4. Vibrate a motor on the handlebar
  5. Mount it and test on a quiet road with a helper

Related projects

Common questions

What parts do I need for the bicycle rear vehicle warning?

ESP32 DevKit V1, Laser distance sensor (TF-Luna LiDAR), Vibration motor (coin type), BC547 NPN transistor, Resistor 1 kΩ, 18650 cell 2600 mAh (branded), Battery holder 18650 single and TP4056 module with protection (USB-C).

How long does the bicycle rear vehicle warning take to build?

About 180 minutes for a intermediate maker.