Idea
In short
How do you build a bicycle speedometer with a Hall sensor?
A Hall sensor and a magnet on the wheel give speed and trip distance on an OLED display. You need Arduino Nano, Hall Effect Sensor A3144, Neodymium magnets (10 × 3 mm), SSD1306 OLED Display, 18650 cell 2600 mAh (branded), Battery holder 18650 single and MT3608 Boost Module.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a Hall effect sensor to count wheel turns.
Parts list
- Development Boards
- Sensors
- Mechanical & Hardware
- Displays
- Batteries
- Power
- Power
How to build it
- Fix the magnet to a spoke and the sensor to the fork
- Count pulses with an interrupt
- Time between pulses gives speed
- Add trip distance and a maximum
- Store the odometer in EEPROM
Common questions
What parts do I need for the bicycle speedometer with a Hall sensor?
Arduino Nano, Hall Effect Sensor A3144, Neodymium magnets (10 × 3 mm), SSD1306 OLED Display, 18650 cell 2600 mAh (branded), Battery holder 18650 single and MT3608 Boost Module.
How long does the bicycle speedometer with a Hall sensor take to build?
About 120 minutes for a intermediate maker.
