Idea
In short
How do you build a driver drowsiness alert glasses?
An IR reflective sensor on a glasses frame watches the eye and buzzes when the eye stays closed for more than a second. You need Arduino Nano, TCRT5000 IR reflective sensor module, Vibration motor (coin type), BC547 NPN transistor, Resistor 1 kΩ, Signal Diode 1N4148, Li-Po battery 3.7 V 500 mAh and TP4056 module with protection (USB-C).
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Detect a long event in a noisy reflective sensor signal.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Passives
- Semiconductors
- Batteries
- Power
How to build it
- Mount the sensor on the frame facing the eyelid
- Read the analog reflection and learn open and closed levels
- Normal blinks last under 400 ms: ignore them
- Vibrate when closed for more than 1 s
- Never rely on it while driving: it is a learning project
Common questions
What parts do I need for the driver drowsiness alert glasses?
Arduino Nano, TCRT5000 IR reflective sensor module, Vibration motor (coin type), BC547 NPN transistor, Resistor 1 kΩ, Signal Diode 1N4148, Li-Po battery 3.7 V 500 mAh and TP4056 module with protection (USB-C).
How long does the driver drowsiness alert glasses take to build?
About 150 minutes for a intermediate maker.
