Laser distance sensor (TF-Luna LiDAR)
Single-point LiDAR that reads up to 8 m.
MeasuresDistance
Range0.2 to 8 m
Accuracy±6 cm up to 3 m
InterfaceUART or I2C
SensorsReviewedMPN TF-LunaUsed in 4 projects
In short
What is the Laser distance sensor (TF-Luna LiDAR) and what is it used for?
Single-point LiDAR that reads up to 8 m. Makers use it for drones, level measurement.
How it works
It times modulated infrared light (time of flight) and calculates distance.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Distance |
| Range | 0.2 to 8 m |
| Accuracy | ±6 cm up to 3 m |
| Interface | UART or I2C |
| Supply voltage | 3.7 to 5.2 V |
Pinout
15 V
2RXD / SDA
3TXD / SCL
4GND
5Mode select (ground for I2C)
6Multiplexing output
How to use it
UART at 115200 baud by default; each frame starts with 0x59 0x59 followed by distance in cm and signal strength. Ignore readings with very low strength.
Applications
Droneslevel measurement
Builds that use it
Alternatives
- TFmini-S LiDARLonger range
- VL53L1X long-range ToF sensorSmaller, up to 4 m
Common questions
What is the Laser distance sensor (TF-Luna LiDAR) used for?
In maker projects: drones, level measurement.
How does the Laser distance sensor (TF-Luna LiDAR) work?
It times modulated infrared light (time of flight) and calculates distance.
What voltage does the Laser distance sensor (TF-Luna LiDAR) need?
3.7 to 5.2 V.
How do I connect the Laser distance sensor (TF-Luna LiDAR) to an Arduino or ESP32?
UART or I2C. Pins: 1 (5 V), 2 (RXD / SDA), 3 (TXD / SCL), 4 (GND), 5 (Mode select (ground for I2C)), 6 (Multiplexing output).
What can I use instead of the Laser distance sensor (TF-Luna LiDAR)?
TFmini-S LiDAR and VL53L1X long-range ToF sensor.
