Idea
In short
How do you build a sixteen-bit precision voltmeter?
A sixteen-bit converter reads small voltages far more finely than the board's own input, with a gain setting for each range. You need Arduino Nano, ADS1115 16-bit ADC module, Potentiometer 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure small voltages precisely.
Parts list
- Development Boards
- Sensors
- Passives
- Displays
- Prototyping
How to build it
- Wire the converter on I2C
- Read one channel in volts
- Try each gain range
- Average for a steady reading
- Show the value on the display
Common questions
What parts do I need for the sixteen-bit precision voltmeter?
Arduino Nano, ADS1115 16-bit ADC module, Potentiometer 10 kΩ, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the sixteen-bit precision voltmeter take to build?
About 240 minutes for a intermediate maker.
