Projects / Ideas / Four-digit panel voltmeter

Four-digit panel voltmeter

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build a four-digit panel voltmeter?

A seven-segment display shows the voltage of a battery or a small supply with a divider and a calibration step. You need Arduino Nano, 7-segment display 4 digit (common cathode), Resistor 10 kΩ × 2, Resistor 100 kΩ, Potentiometer 10 kΩ and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a small panel meter.

How to build it

  1. Build a divider
  2. Read the ADC
  3. Calibrate with a multimeter
  4. Show four digits
  5. Add a range switch

Related projects

Common questions

What parts do I need for the four-digit panel voltmeter?

Arduino Nano, 7-segment display 4 digit (common cathode), Resistor 10 kΩ × 2, Resistor 100 kΩ, Potentiometer 10 kΩ and Breadboard 830 Tie Points.

How long does the four-digit panel voltmeter take to build?

About 210 minutes for a intermediate maker.