Idea
In short
How do you build an ESP32 altitude change meter?
An ESP32 turns BME280 pressure readings into a height change from a starting point, set with a button, and shows climb and descent on an OLED. Weather changes drift the result, so it is a guide. You need ESP32 DevKit V1, BME280 Environmental Sensor, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure height changes from pressure.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
- Prototyping
How to build it
- Read the pressure over I2C
- Set a reference with the button
- Convert the difference to metres
- Track total climb and descent
- Smooth the pressure to ignore noise
Common questions
What parts do I need for the ESP32 altitude change meter?
ESP32 DevKit V1, BME280 Environmental Sensor, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the ESP32 altitude change meter take to build?
About 150 minutes for a intermediate maker.
