Idea
In short
How do you build a gas resistance explorer?
A BME680 shows how its gas resistance drops near alcohol hand gel, coffee and cooking smells, to learn how a metal oxide sensor behaves. You need ESP32 DevKit V1, BME680 gas, pressure, humidity and temperature sensor, SSD1306 OLED Display and Tactile push button 6 mm.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Explore a metal oxide gas sensor and its warm-up.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
How to build it
- Heat the sensor and let it stabilise
- Record the baseline gas resistance
- Bring different smells near it
- Plot the response and recovery
- Save the readings to compare
Common questions
What parts do I need for the gas resistance explorer?
ESP32 DevKit V1, BME680 gas, pressure, humidity and temperature sensor, SSD1306 OLED Display and Tactile push button 6 mm.
How long does the gas resistance explorer take to build?
About 120 minutes for a intermediate maker.
