SHT20 soil temperature and humidity probe
SHT20 inside a sintered cap for outdoor use.
MeasuresTemperature and relative humidity
InterfaceI2C
Supply voltage3.3 V
SensorsReviewedMPN SHT20 probeUsed in 2 projects
In short
What is the SHT20 soil temperature and humidity probe and what is it used for?
SHT20 inside a sintered cap for outdoor use. Makers use it for outdoor humidity.
How it works
A Sensirion SHT20 sensor sealed behind a breathable cap.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Temperature and relative humidity |
| Interface | I2C |
| Supply voltage | 3.3 V |
Pinout
Red3.3 V
BlackGround
YellowSDA (check the seller's colours)
GreenSCL
How to use it
I2C at address 0x40. Long cables slow the bus, so use 10 to 20 kHz or a bus extender for more than a metre. Despite the name, it measures air humidity inside the probe cap.
Applications
Outdoor humidity
Builds that use it
Alternatives
- SHT31 temperature and humidity sensorBoard version
Common questions
What is the SHT20 soil temperature and humidity probe used for?
In maker projects: outdoor humidity.
How does the SHT20 soil temperature and humidity probe work?
A Sensirion SHT20 sensor sealed behind a breathable cap.
What voltage does the SHT20 soil temperature and humidity probe need?
3.3 V.
How do I connect the SHT20 soil temperature and humidity probe to an Arduino or ESP32?
I2C. Pins: Red (3.3 V), Black (Ground), Yellow (SDA (check the seller's colours)), Green (SCL).
What can I use instead of the SHT20 soil temperature and humidity probe?
SHT31 temperature and humidity sensor.
