Components / Motors and drivers / MG996R metal gear servo

MG996R metal gear servo

Strong standard-size servo with metal gears.

TypeRC servo, 180° typical
Supply voltage4.8 to 7.2 V
CurrentUp to about 2.5 A stall
Torque or outputAbout 9 to 11 kg·cm
Motors & ActuatorsReviewedMPN MG996RUsed in 19 projects
71°
In short

What is the MG996R metal gear servo and what is it used for?

Strong standard-size servo with metal gears. Makers use it for robot arms, steering.

How it works

A DC motor, metal gearbox and potentiometer with a control circuit that turns the motor until the pot matches the commanded position.

Key specifications

Motor or actuator specValue
TypeRC servo, 180° typical
Supply voltage4.8 to 7.2 V
CurrentUp to about 2.5 A stall
Torque or outputAbout 9 to 11 kg·cm
Control50 Hz PWM, 1 to 2 ms pulse
Watch out forPower from a separate supply, not the board's 5 V pin

Pinout

BrownGND
Red4.8 to 7.2 V
OrangeSignal (50 Hz PWM)

How to use it

Use the Servo library. Power it from a 5 to 6 V supply that can give 2 to 3 A, connect grounds together and never power it from the Arduino 5 V pin. Many sold units are clones that jitter, so test before fitting.

Applications

Alternatives

Buy at

Common questions

What is the MG996R metal gear servo used for?

In maker projects: robot arms, steering.

How does the MG996R metal gear servo work?

A DC motor, metal gearbox and potentiometer with a control circuit that turns the motor until the pot matches the commanded position.

What voltage does the MG996R metal gear servo need?

4.8 to 7.2 V.

What can I use instead of the MG996R metal gear servo?

MG995 servo, DS3218 20 kg digital servo and PCA9685 16-channel servo driver.