Idea
In short
How do you build a nurse call button system?
Bedside buttons call a nurse station with the bed number shown and a chime. You need ESP32 DevKit V1 × 2, Arcade push button 30 mm × 3, 16x2 LCD with I2C backpack (PCF8574), Active buzzer 5 V, DFPlayer Mini MP3 module, Speaker 8 Ω 0.5 W and SanDisk microSD card 32 GB (A1, Class 10).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a call system.
Parts list
- Development BoardsESP32 DevKit V1 × 2
- Switches
- Displays
- Motors & Actuators
- Interfaces
- Motors & Actuators
- SBC Accessories
How to build it
- Give each bed an ID
- Send the call over Wi-Fi
- Show bed number
- Chime until acknowledged
- Log response time
Common questions
What parts do I need for the nurse call button system?
ESP32 DevKit V1 × 2, Arcade push button 30 mm × 3, 16x2 LCD with I2C backpack (PCF8574), Active buzzer 5 V, DFPlayer Mini MP3 module, Speaker 8 Ω 0.5 W and SanDisk microSD card 32 GB (A1, Class 10).
How long does the nurse call button system take to build?
About 240 minutes for a intermediate maker.
