Idea
In short
How do you build an ESP32 flame sensor alert?
An ESP32 reads an infrared flame sensor module and sounds a buzzer and lights an LED when a flame such as a candle is seen at close range. A learning demo only, not a fire alarm: never rely on it to protect people or property. You need ESP32 DevKit V1, Flame sensor module (IR), Active buzzer 5 V, LED 5 mm red, Resistor 330 Ω and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Detect a candle flame at close range.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Passives
- Prototyping
How to build it
- Wire the sensor analog output
- Record the reading with no flame
- Set a threshold
- Light the LED and sound the buzzer above it
- Add a hold time
Common questions
What parts do I need for the ESP32 flame sensor alert?
ESP32 DevKit V1, Flame sensor module (IR), Active buzzer 5 V, LED 5 mm red, Resistor 330 Ω and Breadboard 830 Tie Points.
How long does the ESP32 flame sensor alert take to build?
About 120 minutes for a beginner maker.
