Components / Interface and audio modules / DFPlayer Mini MP3 module

DFPlayer Mini MP3 module

Plays MP3 files from a microSD card and drives a small speaker.

FunctionMP3 player with 3 W amplifier
Supply voltage3.2 to 5 V
InterfaceUART 9600 baud or buttons
Rating3 W speaker output
InterfacesReviewedMPN DFR0299Used in 33 projects
DFPLAY
In short

What is the DFPlayer Mini MP3 module and what is it used for?

Plays MP3 files from a microSD card and drives a small speaker. Makers use it for talking projects, sound effects.

How it works

An MP3 decoder chip reads the microSD card and drives a built-in 3 W amplifier.

Key specifications

Interface module specValue
FunctionMP3 player with 3 W amplifier
Supply voltage3.2 to 5 V
InterfaceUART 9600 baud or buttons
Rating3 W speaker output
Logic level3.3 V RX (add a 1 kΩ resistor from 5 V boards)

Pinout

1VCC (3.2 to 5 V)
2RX (1 kΩ from 5 V boards)
3TX
45DAC R L line out
68SPK1 SPK2 (speaker up to 3 W)
7GND
16BUSY (low while playing)

How to use it

Put files on a FAT32 card as 0001.mp3, 0002.mp3 or in an mp3 folder and use the DFRobotDFPlayerMini library at 9600 baud. Some clone chips do not send acknowledgements, so turn ACK off in begin() if it fails.

Applications

Alternatives

Buy at

Common questions

What is the DFPlayer Mini MP3 module used for?

In maker projects: talking projects, sound effects.

How does the DFPlayer Mini MP3 module work?

An MP3 decoder chip reads the microSD card and drives a built-in 3 W amplifier.

What voltage does the DFPlayer Mini MP3 module need?

3.2 to 5 V.

How do I connect the DFPlayer Mini MP3 module to an Arduino or ESP32?

UART 9600 baud or buttons. Pins: 1 (VCC (3.2 to 5 V)), 2 (RX (1 kΩ from 5 V boards)), 3 (TX), 4 5 (DAC R L line out), 6 8 (SPK1 SPK2 (speaker up to 3 W)), 7 (GND).

What can I use instead of the DFPlayer Mini MP3 module?

ISD1820 voice recorder module and Speaker 4 Ω 3 W.