Idea
In short
How do you build a wireless doorbell with ESP-NOW?
A button on the gate sends a message by ESP-NOW to a chime inside the house, with no Wi-Fi router needed. You need ESP32 DevKit V1 × 2, Tactile push button 6 mm, DFPlayer Mini MP3 module, Speaker 8 Ω 0.5 W, SanDisk microSD card 32 GB (A1, Class 10), 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Send small messages between ESP32 boards directly.
Parts list
- Development BoardsESP32 DevKit V1 × 2
- Switches
- Interfaces
- Motors & Actuators
- SBC Accessories
- Batteries
- Power
How to build it
- Find the receiver's MAC address
- Send a message on button press
- Play a chime on receipt
- Add acknowledgement
- Put the sender to deep sleep between presses
Common questions
What parts do I need for the wireless doorbell with ESP-NOW?
ESP32 DevKit V1 × 2, Tactile push button 6 mm, DFPlayer Mini MP3 module, Speaker 8 Ω 0.5 W, SanDisk microSD card 32 GB (A1, Class 10), 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
How long does the wireless doorbell with ESP-NOW take to build?
About 150 minutes for a intermediate maker.
