Idea
In short
How do you build a wheel-legged balancing robot?
A balancing robot with legs that change height by servo, like a delivery robot. You need ESP32 DevKit V1, MPU6050 IMU, MG996R metal gear servo × 2, N20 gear motor with encoder × 2, TB6612FNG Motor Driver and Li-Po 2S 7.4 V 2200 mAh 25C (RC).
- Level
- Advanced
- Time
- About 720 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Control a balancing robot with variable height.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Motors & Actuators
- Motor Drivers
- Batteries
How to build it
- Balance with PID
- Add leg servos
- Keep centre of mass over the wheels
- Raise and lower
- Tune each height
Common questions
What parts do I need for the wheel-legged balancing robot?
ESP32 DevKit V1, MPU6050 IMU, MG996R metal gear servo × 2, N20 gear motor with encoder × 2, TB6612FNG Motor Driver and Li-Po 2S 7.4 V 2200 mAh 25C (RC).
How long does the wheel-legged balancing robot take to build?
About 720 minutes for a advanced maker.
