Idea
In short
How do you build a six-legged walking robot?
A hexapod with 18 servos walks with a tripod gait, controlled from a phone over Bluetooth. You need ESP32 DevKit V1, Hexapod robot frame kit, PCA9685 16-channel servo driver × 2, MG996R metal gear servo × 18, Li-Po 2S 7.4 V 2200 mAh 25C (RC) and XL4015 5 A buck converter module × 2.
- Level
- Advanced
- Time
- About 600 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Generate a gait pattern and drive 18 servos with two PCA9685 boards.
Parts list
- Development Boards
- Mechanical & Hardware
- Motor Drivers
- Motors & ActuatorsOr the servos supplied with the frame
- Batteries
- Power
How to build it
- Give the second PCA9685 a different address
- Calibrate every servo's centre
- Move legs 1, 3 and 5 together, then 2, 4 and 6 (tripod gait)
- Add turn and sideways steps
- Drive from a BLE phone app
Related projects
Common questions
What parts do I need for the six-legged walking robot?
ESP32 DevKit V1, Hexapod robot frame kit, PCA9685 16-channel servo driver × 2, MG996R metal gear servo × 18, Li-Po 2S 7.4 V 2200 mAh 25C (RC) and XL4015 5 A buck converter module × 2. MG996R metal gear servo × 18: Or the servos supplied with the frame.
How long does the six-legged walking robot take to build?
About 600 minutes for a advanced maker.
