Idea
In short
How do you build a wheel odometry plus IMU localisation?
Combine wheel encoders and a gyro to estimate position better than either alone. You need ESP32 DevKit V1, N20 gear motor with encoder × 2, BNO055 absolute orientation sensor, TB6612FNG Motor Driver, Robot car chassis kit 2WD (acrylic) and Li-ion 18650 pack 3S 2P (11.1 V).
- Level
- Advanced
- Time
- About 360 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Fuse sensors for localisation.
Parts list
- Development Boards
- Motors & Actuators
- Sensors
- Motor Drivers
- Mechanical & Hardware
- BatteriesUse a 2S pack
How to build it
- Count wheel ticks
- Read yaw from the BNO055
- Fuse with a complementary filter
- Drive a square
- Measure drift
Common questions
What parts do I need for the wheel odometry plus IMU localisation?
ESP32 DevKit V1, N20 gear motor with encoder × 2, BNO055 absolute orientation sensor, TB6612FNG Motor Driver, Robot car chassis kit 2WD (acrylic) and Li-ion 18650 pack 3S 2P (11.1 V). Li-ion 18650 pack 3S 2P (11.1 V): Use a 2S pack.
How long does the wheel odometry plus IMU localisation take to build?
About 360 minutes for a advanced maker.
