Idea
In short
How do you build an RC plane failsafe?
If the radio link drops, the plane levels and turns to a safe course using an IMU. You need ESP32 DevKit V1, MPU6050 IMU, SG90 Micro Servo × 2, GPS module NEO-6M and Li-Po battery 3.7 V 2000 mAh.
- Level
- Intermediate
- Time
- About 360 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Add a failsafe to an RC model.
Parts list
- Development Boards
- Sensors
- Motors & ActuatorsSG90 Micro Servo × 2
- Sensors
- Batteries
How to build it
- Watch the receiver channels
- Detect loss of signal
- Level the wings with the IMU
- Hold a turn
- Test on the ground
Common questions
What parts do I need for the RC plane failsafe?
ESP32 DevKit V1, MPU6050 IMU, SG90 Micro Servo × 2, GPS module NEO-6M and Li-Po battery 3.7 V 2000 mAh.
How long does the RC plane failsafe take to build?
About 360 minutes for a intermediate maker.
