Idea
In short
How do you build an ESP32 servo from a phone over Bluetooth?
An ESP32 moves a servo to an angle sent as text from a phone over classic Bluetooth serial. The servo has its own 5 V supply and a common ground. You need ESP32 DevKit V1, SG90 Micro Servo and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 140 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Command a servo from a phone with no Wi-Fi.
Parts list
- Development Boards
- Motors & Actuators
- Prototyping
How to build it
- Start Bluetooth serial
- Read a number from a line of text
- Limit it to 0 to 180
- Move the servo
- Reply with the angle
Common questions
What parts do I need for the ESP32 servo from a phone over Bluetooth?
ESP32 DevKit V1, SG90 Micro Servo and Breadboard 830 Tie Points.
How long does the ESP32 servo from a phone over Bluetooth take to build?
About 140 minutes for a intermediate maker.
