Idea
In short
How do you build a two-axis camera gimbal?
An IMU and two motors keep a phone or camera level while you move. You need ESP32 DevKit V1, MPU6050 IMU, SG90 Micro Servo × 2, PCA9685 16-channel servo driver and Li-Po battery 3.7 V 2000 mAh.
- Level
- Advanced
- Time
- About 360 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Stabilise with feedback.
Parts list
- Development Boards
- Sensors
- Motors & ActuatorsSG90 Micro Servo × 2
- Motor Drivers
- Batteries
How to build it
- Read tilt from the IMU
- Run PID for each axis
- Drive servos to cancel the tilt
- Tune gains
- Balance the load first
Related projects
Common questions
What parts do I need for the two-axis camera gimbal?
ESP32 DevKit V1, MPU6050 IMU, SG90 Micro Servo × 2, PCA9685 16-channel servo driver and Li-Po battery 3.7 V 2000 mAh.
How long does the two-axis camera gimbal take to build?
About 360 minutes for a advanced maker.
