USB-C Breakout Board
Exposes selected USB-C connector signals on a breakout.
TypeUSB Type-C receptacle on a breakout
Pitch2.54 mm pads
Rating5 V, up to 3 A with suitable cable and source
PinsVBUS, GND, CC1, CC2 (D+ and D− on data versions)
ConnectorsReviewedMPN USB-C 16-pin breakoutUsed in 4 projects
In short
What is the USB-C Breakout Board and what is it used for?
Exposes selected USB-C connector signals on a breakout. Makers use it for identify actual resistor and pin requirements.
In the real world
Prototype interfaces and charging ports
How it works
Physical fit alone does not prove electrical compatibility. Verify pitch, mating type, polarity and current rating.
Key specifications
| Connector spec | Value |
|---|---|
| Type | USB Type-C receptacle on a breakout |
| Pitch | 2.54 mm pads |
| Rating | 5 V, up to 3 A with suitable cable and source |
| Pins | VBUS, GND, CC1, CC2 (D+ and D− on data versions) |
| Used for | Powering projects from USB-C chargers |
Pinout
VBUS5 V
GNDGround
CC1 / CC2Need 5.1 kΩ to GND each for a charger to supply 5 V
D+ / D−USB 2.0 data (data versions only)
How to use it
A USB-C charger will not turn on 5 V unless CC1 and CC2 each see a 5.1 kΩ resistor to ground. Good breakouts have them fitted; check before you blame the charger.
Applications
5 V power input for buildsReplacing micro-USB on old projects
Common questions
What is the USB-C Breakout Board used for?
In products: prototype interfaces and charging ports. In maker projects: identify actual resistor and pin requirements.
How does the USB-C Breakout Board work?
Physical fit alone does not prove electrical compatibility. Verify pitch, mating type, polarity and current rating.
