Projects / Ideas / Battery charge curve recorder

Battery charge curve recorder

IntermediatePowerIdeaReviewed
In short

How do you build a battery charge curve recorder?

A single-cell charger module charges a protected Li-ion cell while the voltage and current are logged, to see the charge stages. You need Arduino Nano, TP4056 module with protection (USB-C), INA219 Current Monitor, 18650 cell 2600 mAh (branded), Battery holder 18650 single, MicroSD Card Module and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 270 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Observe constant current and constant voltage stages.

How to build it

  1. Read the charging safety notes
  2. Wire the charger with a protected cell
  3. Log voltage and current
  4. Plot the stages
  5. Note the termination current

Related projects

Common questions

What parts do I need for the battery charge curve recorder?

Arduino Nano, TP4056 module with protection (USB-C), INA219 Current Monitor, 18650 cell 2600 mAh (branded), Battery holder 18650 single, MicroSD Card Module and Breadboard 830 Tie Points.

How long does the battery charge curve recorder take to build?

About 270 minutes for a intermediate maker.