Idea
In short
How do you build a boost converter efficiency lab?
A boost module raises a battery voltage to 5 V. Measure input and output power and work out the efficiency at several loads. You need MT3608 Boost Module, 18650 cell 2600 mAh (branded), Battery holder 18650 single, Resistor 10 kΩ, Resistor 220 Ω × 3, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure converter efficiency.
Parts list
- Power
- Batteries
- Power
- Passives
- PassivesResistor 220 Ω × 3
- Tools & Instruments
- Prototyping
How to build it
- Set the output to 5 V
- Load it with resistors
- Measure input and output
- Compute efficiency
- Plot against load
Common questions
What parts do I need for the boost converter efficiency lab?
MT3608 Boost Module, 18650 cell 2600 mAh (branded), Battery holder 18650 single, Resistor 10 kΩ, Resistor 220 Ω × 3, Digital multimeter and Breadboard 830 Tie Points.
How long does the boost converter efficiency lab take to build?
About 240 minutes for a intermediate maker.
