Projects / Ideas / Two classic op-amps compared

Two classic op-amps compared

IntermediateAnalog CircuitsIdeaReviewed
In short

How do you build a two classic op-amps compared?

Build the same amplifier with a 741 and a JFET input chip and compare offset, bias current effects and the frequency response. You need LM741 op-amp, TL071 low-noise JFET op-amp, Resistor 10 kΩ × 2, Resistor 100 kΩ × 2, Ceramic Capacitor 100 nF, 9 V battery × 2, 9 V battery snap with DC jack × 2, Digital multimeter and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Compare op-amp types.

Parts list

How to build it

  1. Wire the same gain stage twice
  2. Measure the output offset
  3. Add a high source resistance
  4. Compare how much each shifts
  5. Sweep the frequency

Related projects

Common questions

What parts do I need for the two classic op-amps compared?

LM741 op-amp, TL071 low-noise JFET op-amp, Resistor 10 kΩ × 2, Resistor 100 kΩ × 2, Ceramic Capacitor 100 nF, 9 V battery × 2, 9 V battery snap with DC jack × 2, Digital multimeter and Breadboard 830 Tie Points.

How long does the two classic op-amps compared take to build?

About 210 minutes for a intermediate maker.