Idea
In short
How do you build a JFET source follower lab?
A JFET with a very high input resistance buffers a signal, and you compare it to a transistor stage. You need 2N3819 N-channel JFET, Resistor 10 kΩ × 2, Potentiometer 10 kΩ, Electrolytic capacitor 10 µF × 2, 9 V battery, 9 V battery snap with DC jack, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a high-impedance buffer.
Parts list
- Semiconductors
- PassivesResistor 10 kΩ × 2
- Passives
- Passives
- Batteries
- Power
- Tools & Instruments
- Prototyping
How to build it
- Bias the JFET
- Add the coupling capacitors
- Feed a small signal
- Measure the gain
- Compare with a transistor
Common questions
What parts do I need for the JFET source follower lab?
2N3819 N-channel JFET, Resistor 10 kΩ × 2, Potentiometer 10 kΩ, Electrolytic capacitor 10 µF × 2, 9 V battery, 9 V battery snap with DC jack, Digital multimeter and Breadboard 830 Tie Points.
How long does the JFET source follower lab take to build?
About 240 minutes for a intermediate maker.
