TL071 low-noise JFET op-amp
Low-noise JFET op-amp for audio.
FunctionJFET op-amp
Supply voltage±3.5 to ±18 V
Speed3 MHz GBW
PackageDIP-8
Integrated CircuitsReviewedMPN TL071CPUsed in 3 projects
In short
What is the TL071 low-noise JFET op-amp and what is it used for?
Low-noise JFET op-amp for audio. Makers use it for audio preamps.
How it works
An op-amp with a JFET input stage for low bias current and low noise.
Key specifications
| Integrated circuit spec | Value |
|---|---|
| Function | JFET op-amp |
| Supply voltage | ±3.5 to ±18 V |
| Speed | 3 MHz GBW |
| Package | DIP-8 |
Pinout
1Offset null
2Inverting input
3Non-inverting input
4VCC−
5Offset null
6Output
7VCC+
8Not connected
How to use it
JFET inputs draw almost no current, which suits audio, photodiode and high-impedance sensors. It needs a split supply of at least about ±5 V and its inputs must not go near the negative rail.
Applications
Audio preamps
Builds that use it
Alternatives
- TL072 dual JFET op-ampTwo in one package
- NE5532 dual low-noise op-ampLower noise for audio
Common questions
What is the TL071 low-noise JFET op-amp used for?
In maker projects: audio preamps.
How does the TL071 low-noise JFET op-amp work?
An op-amp with a JFET input stage for low bias current and low noise.
What voltage does the TL071 low-noise JFET op-amp need?
±3.5 to ±18 V.
What can I use instead of the TL071 low-noise JFET op-amp?
TL072 dual JFET op-amp and NE5532 dual low-noise op-amp.
