Idea
In short
How do you build a mini adjustable bench supply?
An LM317 regulator and a pot give 1.25 to 12 V from a 12 V adapter, with a heat sink and fuse. You need LM317 adjustable regulator, Resistor 220 Ω, Potentiometer 10 kΩ, Electrolytic Capacitor 100 µF, Ceramic Capacitor 100 nF, 12 V 2 A DC adapter, Fuse 1 A glass (5 × 20 mm), Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build an adjustable linear regulator.
Parts list
- Power
- Passives
- Passives
- Passives
- Passives
- Power
- Passives
- Prototyping
- Prototyping
How to build it
- Set the output with the resistor ratio
- Add input and output capacitors
- Measure dropout
- Check heat at 500 mA
- Add a fuse and a small heat sink
Common questions
What parts do I need for the mini adjustable bench supply?
LM317 adjustable regulator, Resistor 220 Ω, Potentiometer 10 kΩ, Electrolytic Capacitor 100 µF, Ceramic Capacitor 100 nF, 12 V 2 A DC adapter, Fuse 1 A glass (5 × 20 mm), Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the mini adjustable bench supply take to build?
About 180 minutes for a intermediate maker.
