Idea
In short
How do you build an MOSFET dimmer bench for a 12 V lamp?
A power MOSFET dims a 12 V lamp with PWM, and you view the gate waveform and heating. You need Arduino Nano, IRF540N N-channel MOSFET, Resistor 220 Ω, Resistor 10 kΩ, 12 V LED strip warm white (5 m, 2835), 12 V 2 A DC adapter, Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Compare gate drive and switching losses.
Parts list
- Development Boards
- Semiconductors
- Passives
- Passives
- Optoelectronics
- Power
- Passives
- Prototyping
How to build it
- Wire the MOSFET with a gate resistor
- Add the pull-down
- Dim with PWM
- Check the gate waveform
- Feel the heating at different duty
Common questions
What parts do I need for the MOSFET dimmer bench for a 12 V lamp?
Arduino Nano, IRF540N N-channel MOSFET, Resistor 220 Ω, Resistor 10 kΩ, 12 V LED strip warm white (5 m, 2835), 12 V 2 A DC adapter, Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
How long does the MOSFET dimmer bench for a 12 V lamp take to build?
About 210 minutes for a intermediate maker.
