Projects / Ideas / Adjustable bench supply from an LM317

Adjustable bench supply from an LM317

IntermediatePowerIdeaReviewed
In short

How do you build an adjustable bench supply from an LM317?

An LM317 with a potentiometer makes a 1.25 to 12 V adjustable supply with a heatsink, a current limit and a meter. You need LM317 adjustable regulator, Heatsink TO-220, Potentiometer 10 kΩ, Resistor 220 Ω, Rectifier Diode 1N4007 × 2, Electrolytic capacitor 1000 µF, 12 V 2 A DC adapter and Voltage sensor module (0 to 25 V).

Level
Intermediate
Time
About 150 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Design an adjustable linear regulator with protection.

How to build it

  1. Set the output with the resistor ratio
  2. Add input and output capacitors and protection diodes
  3. Add a heat sink and calculate dissipation
  4. Add a voltmeter
  5. Test with a resistor load

Related projects

Common questions

What parts do I need for the adjustable bench supply from an LM317?

LM317 adjustable regulator, Heatsink TO-220, Potentiometer 10 kΩ, Resistor 220 Ω, Rectifier Diode 1N4007 × 2, Electrolytic capacitor 1000 µF, 12 V 2 A DC adapter and Voltage sensor module (0 to 25 V).

How long does the adjustable bench supply from an LM317 take to build?

About 150 minutes for a intermediate maker.