Projects / Ideas / Nine volt rail from a 12 V adapter

Nine volt rail from a 12 V adapter

BeginnerPowerIdeaReviewed
In short

How do you build a nine volt rail from a 12 V adapter?

A linear regulator turns a 12 V adapter into a steady 9 V rail, and you measure the heat it makes. You need 7809 voltage regulator, Electrolytic capacitor 10 µF, Ceramic Capacitor 100 nF, Resistor 1 kΩ, LED 5 mm red, 12 V 2 A DC adapter and Breadboard 830 Tie Points.

Level
Beginner
Time
About 150 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make a 9 V rail.

How to build it

  1. Read the datasheet
  2. Wire the capacitors
  3. Add a light load
  4. Measure the output
  5. Feel how warm it gets

Related projects

Common questions

What parts do I need for the nine volt rail from a 12 V adapter?

7809 voltage regulator, Electrolytic capacitor 10 µF, Ceramic Capacitor 100 nF, Resistor 1 kΩ, LED 5 mm red, 12 V 2 A DC adapter and Breadboard 830 Tie Points.

How long does the nine volt rail from a 12 V adapter take to build?

About 150 minutes for a beginner maker.