Projects / Ideas / 3.3 V rail and trimmer test voltage

3.3 V rail and trimmer test voltage

BeginnerPowerIdeaReviewed
In short

How do you build a 3.3 V rail and trimmer test voltage?

A linear regulator makes a steady 3.3 V rail, and a trimmer on a divider gives an adjustable test voltage from it. You need LM1117 3.3 V regulator, Electrolytic capacitor 10 µF, Ceramic Capacitor 100 nF, Trimmer potentiometer 10 kΩ (3362 single turn), 9 V battery, 9 V battery snap with DC jack, Digital multimeter and Breadboard 830 Tie Points.

Level
Beginner
Time
About 120 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Make a 3.3 V rail.

How to build it

  1. Wire the regulator and capacitors
  2. Check 3.3 V
  3. Wire the trimmer divider
  4. Set a voltage with a meter
  5. Compare input and output

Related projects

Common questions

What parts do I need for the 3.3 V rail and trimmer test voltage?

LM1117 3.3 V regulator, Electrolytic capacitor 10 µF, Ceramic Capacitor 100 nF, Trimmer potentiometer 10 kΩ (3362 single turn), 9 V battery, 9 V battery snap with DC jack, Digital multimeter and Breadboard 830 Tie Points.

How long does the 3.3 V rail and trimmer test voltage take to build?

About 120 minutes for a beginner maker.