Idea
In short
How do you build a negative voltage from a 7660?
A small charge-pump chip makes a negative voltage from a positive one, handy for op-amp and audio experiments at low current. You need ICL7660 voltage inverter, Electrolytic capacitor 10 µF × 2, 9 V battery, 9 V battery snap with DC jack, Resistor 1 kΩ, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 120 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a small negative supply.
Parts list
- Integrated Circuits
- Passives
- Batteries
- Power
- Passives
- Tools & Instruments
- Prototyping
How to build it
- Read the charge-pump pinout
- Wire the two capacitors
- Measure the negative output
- Load it with a resistor
- Plot the voltage against current
Common questions
What parts do I need for the negative voltage from a 7660?
ICL7660 voltage inverter, Electrolytic capacitor 10 µF × 2, 9 V battery, 9 V battery snap with DC jack, Resistor 1 kΩ, Digital multimeter and Breadboard 830 Tie Points.
How long does the negative voltage from a 7660 take to build?
About 120 minutes for a intermediate maker.
