Projects / Ideas / Two buck-boost modules compared

Two buck-boost modules compared

IntermediatePowerIdeaReviewed
In short

How do you build a two buck-boost modules compared?

Feed two small buck-boost modules from a falling battery voltage and compare their steady 3.3 V output and efficiency. You need TPS63020 buck-boost module, TPS61023 boost module, 9 V battery, 9 V battery snap with DC jack, Resistor 330 Ω × 2, Resistor 1 kΩ, Digital multimeter × 2 and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Compare small converters.

How to build it

  1. Set each output
  2. Lower the input in steps
  3. Load each equally
  4. Measure the input and output power
  5. Work out the efficiency

Related projects

Common questions

What parts do I need for the two buck-boost modules compared?

TPS63020 buck-boost module, TPS61023 boost module, 9 V battery, 9 V battery snap with DC jack, Resistor 330 Ω × 2, Resistor 1 kΩ, Digital multimeter × 2 and Breadboard 830 Tie Points.

How long does the two buck-boost modules compared take to build?

About 210 minutes for a intermediate maker.