Idea
In short
How do you build a plus and minus supply?
Two batteries and a pair of regulators make a steady plus and minus supply for op-amp experiments. You need 7905 negative voltage regulator, 7805 voltage regulator, Electrolytic capacitor 10 µF × 4, 9 V battery × 2, 9 V battery snap with DC jack × 2, Digital multimeter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a split supply.
Parts list
- Power
- Power
- Passives
- Batteries9 V battery × 2
- Power
- Tools & Instruments
- Prototyping
How to build it
- Wire the two batteries in series
- Add the positive regulator
- Add the negative regulator
- Check both rails
- Test with an op-amp
Common questions
What parts do I need for the plus and minus supply?
7905 negative voltage regulator, 7805 voltage regulator, Electrolytic capacitor 10 µF × 4, 9 V battery × 2, 9 V battery snap with DC jack × 2, Digital multimeter and Breadboard 830 Tie Points.
How long does the plus and minus supply take to build?
About 180 minutes for a intermediate maker.
