Projects / Ideas / Standing desk height controller

Standing desk height controller

IntermediateMotionIdeaReviewed
In short

How do you build a standing desk height controller?

Two linear actuators raise a desk to remembered heights with three preset buttons. You need Arduino Nano, Linear actuator 12 V (100 mm stroke) × 2, BTS7960 43 A motor driver × 2, Tactile push button 6 mm × 3, 12 V 2 A DC adapter and Blade fuse with inline holder (car type).

Level
Intermediate
Time
About 300 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Control motors in sync.

How to build it

  1. Drive both actuators together
  2. Keep them level
  3. Save three heights
  4. Stop at limits
  5. Add a pinch-safe stop on high current

Related projects

Common questions

What parts do I need for the standing desk height controller?

Arduino Nano, Linear actuator 12 V (100 mm stroke) × 2, BTS7960 43 A motor driver × 2, Tactile push button 6 mm × 3, 12 V 2 A DC adapter and Blade fuse with inline holder (car type).

How long does the standing desk height controller take to build?

About 300 minutes for a intermediate maker.