Idea
In short
How do you build a photo turntable?
A stepper rotates a small platform in equal steps so you can photograph an object from every side. You need Arduino Nano, DRV8825 stepper driver, NEMA 17 stepper motor, Tactile push button 6 mm, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Move precisely and pause for photos.
Parts list
- Development Boards
- Motor Drivers
- Motors & Actuators
- Switches
- Power
- Prototyping
How to build it
- Set microstepping
- Rotate a fixed number of steps
- Pause between steps
- Trigger with a button
- Add a speed control
Common questions
What parts do I need for the photo turntable?
Arduino Nano, DRV8825 stepper driver, NEMA 17 stepper motor, Tactile push button 6 mm, 12 V 2 A DC adapter and Breadboard 830 Tie Points.
How long does the photo turntable take to build?
About 240 minutes for a intermediate maker.
