Linear actuator 12 V (100 mm stroke)
Motor that pushes and pulls a rod.
TypeDC linear actuator with limit switches
Supply voltage12 V
CurrentUp to about 3 A
Torque or outputForce and speed vary by model
Motors & ActuatorsReviewedMPN Linear actuator 100mmUsed in 3 projects
In short
What is the Linear actuator 12 V (100 mm stroke) and what is it used for?
Motor that pushes and pulls a rod. Makers use it for auto doors, solar trackers.
How it works
A DC motor turns a lead screw that pushes a rod in and out.
Key specifications
| Motor or actuator spec | Value |
|---|---|
| Type | DC linear actuator with limit switches |
| Supply voltage | 12 V |
| Current | Up to about 3 A |
| Torque or output | Force and speed vary by model |
| Control | Reverse polarity with an H-bridge or relays |
Pinout
Two wiresReverse polarity to reverse direction
How to use it
Drive with a BTS7960, a Cytron MD10C or two relays wired as a reversing switch. Built-in limit switches stop it at each end.
Applications
Auto doorssolar trackers
Builds that use it
Alternatives
- Push-pull solenoid 12 VShort, fast stroke
Common questions
What is the Linear actuator 12 V (100 mm stroke) used for?
In maker projects: auto doors, solar trackers.
How does the Linear actuator 12 V (100 mm stroke) work?
A DC motor turns a lead screw that pushes a rod in and out.
What voltage does the Linear actuator 12 V (100 mm stroke) need?
12 V.
What can I use instead of the Linear actuator 12 V (100 mm stroke)?
Push-pull solenoid 12 V and BTS7960 43 A motor driver.
