Idea
In short
How do you build an AC bridge for L and C?
A Wheatstone-style bridge with a 1 kHz signal measures unknown capacitors and inductors by balancing. You need NE555 Timer IC, Potentiometer 10 kΩ × 2, Resistor 1 kΩ × 2, Ceramic Capacitor 100 nF, LM358 Op-Amp, Headphone jack module 3.5 mm and Perfboard (dot PCB) 7 × 9 cm.
- Level
- Advanced
- Time
- About 240 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Use a bridge circuit to measure reactance.
Parts list
- Integrated Circuits
- Passives
- PassivesResistor 1 kΩ × 2
- Passives
- Integrated Circuits
- Audio
- Prototyping
How to build it
- Make a 1 kHz signal
- Build the bridge arms
- Listen or measure for the null
- Read the value from the pot
- Compare with a meter
Common questions
What parts do I need for the AC bridge for L and C?
NE555 Timer IC, Potentiometer 10 kΩ × 2, Resistor 1 kΩ × 2, Ceramic Capacitor 100 nF, LM358 Op-Amp, Headphone jack module 3.5 mm and Perfboard (dot PCB) 7 × 9 cm.
How long does the AC bridge for L and C take to build?
About 240 minutes for a advanced maker.
