Idea
In short
How do you build an adjustable pulse generator?
A 555 timer with switchable ranges gives pulses from 1 Hz to 10 kHz for testing. You need NE555 Timer IC, Potentiometer 10 kΩ, Resistor 1 kΩ, Resistor 10 kΩ, Ceramic capacitor 10 nF, Ceramic Capacitor 100 nF, Electrolytic Capacitor 100 µF, Rotary switch 1-pole 12-way and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a small signal source.
Parts list
- Integrated Circuits
- Passives
- Passives
- Passives
- Passives
- Passives
- Passives
- Switches
- Prototyping
How to build it
- Build the oscillator
- Add a range switch
- Fine-tune with a pot
- Check frequency
- Check the duty cycle
Common questions
What parts do I need for the adjustable pulse generator?
NE555 Timer IC, Potentiometer 10 kΩ, Resistor 1 kΩ, Resistor 10 kΩ, Ceramic capacitor 10 nF, Ceramic Capacitor 100 nF, Electrolytic Capacitor 100 µF, Rotary switch 1-pole 12-way and Breadboard 830 Tie Points.
How long does the adjustable pulse generator take to build?
About 180 minutes for a intermediate maker.
