Projects / Ideas / Eight-channel analog logger

Eight-channel analog logger

IntermediateTest & MeasurementIdeaReviewed
In short

How do you build an eight-channel analog logger?

An MCP3008 adds eight 10-bit analog inputs to a Pi Pico, logged to a file with timestamps. You need Raspberry Pi Pico, MCP3008 8-channel 10-bit ADC, Potentiometer 10 kΩ × 3, MicroSD Card Module, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 180 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Add more ADC channels to a microcontroller.

How to build it

  1. Wire the MCP3008 over SPI
  2. Read all eight channels
  3. Add timestamps
  4. Save a CSV on the SD card
  5. Plot channels in a spreadsheet

Related projects

Common questions

What parts do I need for the eight-channel analog logger?

Raspberry Pi Pico, MCP3008 8-channel 10-bit ADC, Potentiometer 10 kΩ × 3, MicroSD Card Module, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the eight-channel analog logger take to build?

About 180 minutes for a intermediate maker.