LM358 Op-Amp
Dual operational amplifier for appropriate analog signal conditioning.
What is the LM358 Op-Amp and what is it used for?
Dual operational amplifier for appropriate analog signal conditioning. Makers use it for explore comparator limitations.
Sensor amplification and conditioning
Integrated circuits combine multiple circuit functions. Always check the exact package, supply rails, pinout and operating conditions.
Key specifications
| Integrated circuit spec | Value |
|---|---|
| Function | Dual operational amplifier |
| Supply voltage | 3 to 32 V single, or ±1.5 to ±16 V |
| Inputs and outputs | Inputs work down to ground; output swings to about 1.5 V below Vcc |
| Speed | 1 MHz gain-bandwidth |
| Package | DIP-8 or SOIC-8 |
| Watch out for | Not rail-to-rail. On 5 V the output tops out near 3.5 V |
Pinout
How to use it
Amplify small sensor signals before the ADC: non-inverting gain = 1 + Rf/Rg. Tie unused inputs as a follower so the spare half does not oscillate.
Applications
Builds that use it
Op-amp inverting amplifier lab
Electret microphone preamp
Sample and hold circuit
Peak detector and hold
Op-amp constant current sink
Solar panel I-V curve tracer
Battery discharge curve analyser
Diode and LED curve tracer
Alternatives
- LM393 ComparatorSame pinout, built as a comparator with open-collector outputs
Common questions
What is the LM358 Op-Amp used for?
In products: sensor amplification and conditioning. In maker projects: explore comparator limitations.
How does the LM358 Op-Amp work?
Integrated circuits combine multiple circuit functions. Always check the exact package, supply rails, pinout and operating conditions.
What voltage does the LM358 Op-Amp need?
3 to 32 V single, or ±1.5 to ±16 V.
What can I use instead of the LM358 Op-Amp?
LM393 Comparator.
