Idea
In short
How do you build an instrumentation amplifier for a load cell?
An INA128 amplifies the tiny bridge signal from a load cell so a meter or ADC can read it. You need INA128 instrumentation amplifier, Load cell 5 kg (bar type), Resistor 100 Ω, Ceramic Capacitor 100 nF × 2, Dual-rail ±12 V DC-DC module and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 120 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Amplify a differential signal with high CMRR.
Parts list
- Integrated Circuits
- Sensors
- PassivesSets gain to about 500
- Passives
- Power
- Prototyping
How to build it
- Excite the bridge with a stable 5 V
- Set gain with RG
- Read the output with a multimeter
- Add weights and plot
- Compare with the HX711
Common questions
What parts do I need for the instrumentation amplifier for a load cell?
INA128 instrumentation amplifier, Load cell 5 kg (bar type), Resistor 100 Ω, Ceramic Capacitor 100 nF × 2, Dual-rail ±12 V DC-DC module and Breadboard 830 Tie Points. Resistor 100 Ω: Sets gain to about 500.
How long does the instrumentation amplifier for a load cell take to build?
About 120 minutes for a advanced maker.
