INA128 instrumentation amplifier
Precision amplifier for bridges and small sensor signals.
FunctionInstrumentation amplifier, gain set by one resistor
Supply voltage±2.25 to ±18 V
PackageDIP-8
Integrated CircuitsReviewedMPN INA128PUsed in 3 projects
In short
What is the INA128 instrumentation amplifier and what is it used for?
Precision amplifier for bridges and small sensor signals. Makers use it for load cells, ECG.
How it works
Three op-amps in one chip amplify the difference between two inputs while rejecting common noise.
Key specifications
| Integrated circuit spec | Value |
|---|---|
| Function | Instrumentation amplifier, gain set by one resistor |
| Supply voltage | ±2.25 to ±18 V |
| Package | DIP-8 |
Pinout
1and 8RG, gain resistor
2Input −
3Input +
4V−
5Reference (output offset)
6Output
7V+
How to use it
Gain = 1 + 50 kΩ ÷ RG. Ideal for strain gauges, thermocouples and bridge sensors. Connect Ref to ground or to mid-supply for single-supply use.
Applications
Load cellsECG
Builds that use it
Alternatives
- AD620 instrumentation amplifierSimilar part, same pinout
- HX711 load cell amplifierAmplifier plus ADC for load cells
Common questions
What is the INA128 instrumentation amplifier used for?
In maker projects: load cells, ECG.
How does the INA128 instrumentation amplifier work?
Three op-amps in one chip amplify the difference between two inputs while rejecting common noise.
What voltage does the INA128 instrumentation amplifier need?
±2.25 to ±18 V.
What can I use instead of the INA128 instrumentation amplifier?
AD620 instrumentation amplifier and HX711 load cell amplifier.
